Search :
Project
Project Title :
โครงการการศึกษาผลการปรับเปลี่ยนอินเทอร์เฟสต่อสมบัติของพอลิเมอร์คอมโพสิทระหว่างเส้นใยป่านศรนารายณ์กับพอลิโพรพิลีน (The study of the interfacial modification on the properties of PP/sisal composites)
downloaded 27 times
Researcher Name :
กษมา จารุกำจร (Kasama Jarukumjorn)
Abstract :
บทคัดย่อ วัสดุคอมโพสิทของเส้นใยป่านศรนารายณ์และพอลิโพรพิลีนถูกเตรียมและวิเคราะห์สมบัติทางกล ความร้อน กระแสวิทยา และสัณฐานวิทยา คอมโพสิทถูกเตรียมในเครื่องบดผสมภายใน ชิ้นงานทดสอบถูกขึ้นรูปโดยใช้เครื่องฉีด ผลของชนิดของสารช่วยให้เข้ากัน คือ พอลิโพรพิลีนกราฟด้วยมาเลอิกแอนไฮดรายด์และพอลิโพรพิลีนกราฟด้วยอะคริลิกแอซิด และปริมาณต่อสมบัติต่างๆ ถูกศึกษา นอกจากนี้อิทธิพลของปริมาณเส้นใยถูกวิเคราะห์ สารช่วยให้เข้ากันส่งผลในทางบวกต่อความทนต่อแรงดึงและความทนต่อแรงดัดของคอมโพสิท โดยไม่ส่งผลอย่างมีนัยสำคัญต่อค่ามอดุลัสของยังก์ มอดุลัสของการดัด และค่าความทนต่อแรงกระแทก พอลิโพรพิลีนกราฟด้วยมาเลอิกแอนไฮดรายด์ส่งผลต่อการปรับปรุงสมบัติทางกลที่ดีกว่าพอลิโพรพิลีนกราฟด้วยอะคริลิกแอซิด เมื่อมีการเพิ่มขึ้นของปริมาณเส้นใย ความทนต่อแรงดึง ความทนต่อแรงดัด มอดุลัสของยังก์ และมอดุลัสของการดัดมีค่าเพิ่มขึ้น ในขณะที่ค่าความทนต่อแรงกระแทกมีค่าลดลง การใส่เส้นใยลงไปในพอลิโพรพิลีนส่งผลต่อการเพิ่มขึ้นของความหนืด นอกจากนี้ยังพบว่าความหนืดเพิ่มขึ้นกับปริมาณเส้นใย แต่อย่างไรก็ตามสารช่วยให้เข้ากันไม่ส่งผลต่อความหนืดของคอมโพสิท จากการวิเคราะห์ด้วยดิฟเฟอร์เรนเชียล สแกนนิ่ง อิเล็คตรอน แคลอริมิทรี พบการเพิ่มขึ้นของอุณหภูมิหลอมเหลว อุณหภูมิตกผลึก และเปอร์เซ็นต์ผลึกของพอลิโพรพิลีน เมื่อมีการใส่เส้นใย อุณหภูมิการเสื่อมสลายของพอลิโพร พิลีนในพอลิเมอร์คอมโพสิทเพิ่มขึ้น เมื่อมีการเติมสารช่วยให้เข้ากัน การใส่เส้นใยลงในพอลิโพรพิลีนส่งผลต่อการเพิ่มขึ้นของอุณหภูมิการบิดเบี้ยว นอกจากนี้สารช่วยให้เข้ากันปรับปรุงอุณหภูมิการบิดเบี้ยวของคอมโพสิท ภาพถ่ายอิเลคตรอนชนิดส่องกราดแสดงให้เห็นว่าสารช่วยให้เข้ากันเพิ่มการยึดติดระหว่างพื้นผิวของเส้นใยและพอลิโพรพิลีนเมทริกซ์ และยังปรับปรุงการกระจายตัวของเส้นใย Abstract Composite materials based on sisal fiber and polypropylene (PP) were prepared and analyzed in terms of mechanical, thermal, rheological, and morphological properties. The composites were prepared in an internal mixer. The test specimens were molded using an injection molding machine. The effects of compatibilizer types: polypropylene grafted maleic anhydride (PP-g-MA) and polypropylene grafted acrylic acid (PP-g-AA) and contents on the properties were studied. In addition, the influence of fiber contents was investigated. The compatibilizers gave a positive impact on tensile strength and flexural strength of the composites without any significant effect on Youngs modulus, flexural modulus, and impact strength. PP-g-MA provided superior improvement in mechanical properties compared to PP-g-AA. With increasing fiber contents, tensile strength, flexural strength, Youngs modulus, and flexural modulus increased while impact strength decreased. Incorporation of fiber into PP resulted in an increase in melt viscosity. The melt viscosity was also found to increase with fiber loading. However, there was no effect of compatibilizers on melt viscosity of the composites. DSC measurements exhibited an increase in melting and crystallization temperature, and % crystallinity of PP with the addition of fibers. Decomposition temperature of PP increased with adding compatibilizers. Incorporating fibers into PP gave an increase in heat distortion temperature (HDT). Compatibilizers also improved the HDT of the composites. Scanning electron micrographs revealed that compatibilizers enhanced surface adhesion between the fiber surface and PP matrix and also improved the fiber dispersion.
Publications :
No
View Publications
Detail
Award/Honor :
Name
Sponsor
Get Date
IRD SEARCH
|
IRD LOGIN