Search :
Project
Project Title :
อิทธิพลของธาตุทองแดงในเหล็กหล่อเหนียวออสเทมเปอร์
downloaded 14 times
Researcher Name :
อุษณีย์ กิตกำธร (Usanee Kitkamthorn)
Abstract :
บทคัดย่อ เหล็กหล่อเหนียวที่ผสมธาตุทองแดงแตกต่างกัน 2 ส่วนผสม คือ 0.6%Cu และ 1.4%Cu นำมาผ่านกระบวนการผลิตเป็นเหล็กหล่อเหนียวออสเทมเปอร์ซึ่งประกอบด้วยสองขั้นตอนคือ ออสเตนนิไทซิ่งที่ 900 องศาเซลเซียส 1 ชั่วโมง และออสเทมเปอริ่งโดยการทำให้เย็นตัวอย่างรวดเร็วจากการชุบลงอ่างเกลือที่อุณหภูมิ 300 และ 340องศาเซลเซียส แล้วทิ้งไว้ที่อุณหภูมิออสเทมเปอริ่งนี้เป็นเวลาต่างๆ กัน ในช่วง 60-6000 วินาที จากการตรวจสอบเชิงคุณภาพของโครงสร้างจุลภาคของเหล็กหล่อเหนียวออสเทมเปร์ทั้งสองส่วนผสมแสดงให้เห็นว่า ปริมาณเบนนิติกเฟอร์ไรท์และออสเตนไนท์เหลือค้างเพิ่มขึ้นตามเวลาที่ใช้ในการทำออสเทมเปอริ่ง ขนาดของของเบนนิติกเฟอร์ไรท์เป็นเข็มละเอียดกว่าเมื่ออุณหภูมิออสเทมเปอริ่งต่ำกว่า เมื่อเปรียบเทียบโครงสร้างจุภาคของเหล็กหล่อเหนียวออสเทมเปอร์ A และ B พบว่า ในเหล็ก B ซึ่งมีปริมาณทองแดงสูงกว่านั้น อัตราการเกิดเบนนิติกเฟอร์ไรท์ในเนื้อพื้นที่ห่างออกมาจากกราฟไฟท์ช้าลงอย่างเห็นได้ชัด ผลการทดสอบความแข็งและการทดสอบแรงดึงชี้ให้เห็นว่า เหล็กหล่อเหนียวที่ผสมธาตุทองแดงทดแทนนิกเกิล สามารถนำมาผลิตเป็นเหล็กหล่อเหนียวออสเทมเปอร์ที่มีคุณภาพตามมาตรฐานเหล็กหล่อออสเทมเปอร์เกรดความแข็งแรงสูง ในขณะที่ไม่สามารถให้คุณภาพตามมาตรฐานสำหรับเกรดความเหนียวสูง Abstract Microstructure and mechanical properties of copper alloyed austempered ductile iron were investigated. The standard tensile specimens were austenitized at 900oC for 60 minute and then austempered at 300Cand 340C for a range of times 60-6000 second. Results showed that amount of bainitic ferrite and retained austenite increase with increasing austempering time. At lower transformation temperature, the bainitic ferrite structure is finer. The transformation of the higher content of copper alloyed iron shows significant in the differennce of microstructure between eutectic cell and intercellular boundary. The yield stress and ultimate tensile stress and %elongation increase with increasing austempering time. The high strength austempered ductile iron was satisfied the standard ASTM A897M:1990. by austempering at 300oC but austempering at 340oC can not produce the more ductile grade of ASTM standard The Microstructure revealed that the amounts of bainitic ferrite, martensite and retained austenite are in good agreement with the tensile properties.
Publications :
No
View Publications
Detail
Award/Honor :
Name
Sponsor
Get Date
IRD SEARCH
|
IRD LOGIN