Search :
Project
Project Title :
การปรับปรุงสมบัติเชิงกลของวัสดุเชิงประกอบอะลูมินา - โครเมีย ด้วยอนุภาคเซอร์โคเนีย (Improvement of mechanical properties of alumina-chromia with zirconia particles)
downloaded 24 times
Researcher Name :
สุขเกษม วัชรมัยสกุล (Sukasem Kangwantrakool)
Abstract :
งานวิจัยนี้มีวัตถุประสงค์ เพื่อปรับปรุงสมบัติเชิงกลของวัสดุเชิงประกอบให้เหมาะสม สำหรับการใช้งานเป็นเกราะกันกระสุน การทดลองส่วนแรก ทำการศึกษาผลของเซอร์โคเนียที่มีต่อสมบัติเชิงกลของอะลูมินา-โครเมียเซรามิก และหาปริมาณของสารเติมแต่งและอุณหภูมิในการเผาผนึกที่เหมาะสม โดยนำผงอะลูมินามาบดผสมกับโครเมียปริมาณร้อยละ 3 โดยน้ำหนัก และใช้เซอร์โคเนียปริมาณร้อยละ 0-6 โดยน้ำหนัก เป็นสารเติมแต่ง ส่วนผสมจะถูกอัดแห้งและทำการเผาผนึกที่อุณหภูมิที่ต่าง ๆ วัสดุเชิงประกอบที่ผ่านการเผาผนึก จะนำไปวิเคราะห์หาลักษณะเฉพาะ ได้แก่ ความหนาแน่น รูพรุน วัฎภาค โครงสร้างจุลภาค รวมถึง ความแข็งแรง ความแข็ง ความเหนียว และความต้านทานการเจาะทะลุ การทดลองส่วนที่ 2 เป็นการศึกษาผลของความหนาที่มีต่อความต้านทานการเจาะทะลุ จากวัสดุเชิงประกอบที่มีสมบัติเชิงกลที่ดีที่สุดจากการทดลองส่วนแรก ผลการทดสอบเชิงกลพบว่าความทนต่อการดัดโค้ง มีค่าสูงสุดเท่ากับ 204±4.12 MPa ซึ่งได้จากชิ้นงานที่ใช้สารเติมแต่งเซอร์โคเนียร้อยละ 6 โดยน้ำหนักที่ผ่านการเผาผนึกที่อุณหภูมิ 1700oC ค่าความเหนียว มีค่าสูงสุดเท่ากับ 6.35±0.34 MPa.m0.5 ซึ่งได้จากชิ้นงานที่ใช้สารเติมแต่งเซอร์โคเนียร้อยละ 6 โดยน้ำหนักที่ผ่านการเผาผนึกที่อุณหภูมิ 1750oC ในขณะที่การลดความหนาของวัสดุ เชิงประกอบส่งผลให้ความต้านทานการเจาะทะลุลดลง Abstract The purpose of this work is to improve the mechanical properties of composite materials for the armor application. The first part of the experiment is to study the effect of ZrO2 on mechanical properties of Al2O3 - Cr2O3 based composite and to determine the proper amount of additive and sintering temperature. Al2O3 powder was mixed with 3%wt Cr2O3 and 0-6%wt ZrO2 as an additive. The mixtures were dry pressed and then sintered at different temperatures. Density, porosity, phase and microstructure of sintered composites were characterized . Flexural strength, hardness, fracture toughness and ballistic performance were also investigated. The second part of the experiment is to study the effect of thickness on ballistic resistance based on composite with the best mechanical properties from the first part. The results from mechanical tests showed that the highest flexural strength, 204±4.12 MPa, was obtained with 6%wt ZrO2 addition and sintering temperature at 1700oC. The maximum fracture toughness, 6.35±0.34 MPa.m0.5, was obtained with 6%wt ZrO2 addition and sintering temperature at 1750oC. Whereas the ballistic resistance of composite decreased with decreasing composite thickness.
Publications :
No
View Publications
Detail
Award/Honor :
Name
Sponsor
Get Date
IRD SEARCH
|
IRD LOGIN